Fall is here, and the effects of summer heat stress are starting to wear off. Along with them, somatic cell count (SCC) should decrease. Not seeing this trend on your dairy? When was the last time you checked the settings of each milking unit in the parlor or the milking equipment
Pulsation ratio directly affects milk flow and milking time. Most manufacturers set the pulsation ratio to a relatively tight range, such as 60:40 (Gasparik et al., 2018). The primary purpose of pulsation is to maintain a high rate of milk flow from the teat within each cycle of pulsation, reduce the negative effects of congestion on the teat, reduce the rate of new mastitis infections, and stimulate milk ejection (Mein et al., 2003). Even a slight change in pulsation ratio, such as a ratio of 67:33, can have a positive effect on udder health and reduce SCC while milking time was prolonged and automatic cluster removal was decreased from a rate of 0.85 to 0.65 kg/min, allowing for less residual milk (Gasparik et al., 2018).
Additionally, the liner used in the machine can have a large influence on milking characteristics. Some physical features to consider when choosing a liner include the type of rubber and composition of the liner, the method of construction, barrel size, liner length, liner elongation and
Overall, milking equipment maintenance is one of the most important factors of an udder health program and in maintaining a quality product, milk. Through routine management of reviewing machine settings and the condition of the equipment, you can identify issues that may arise early and support efficient milk removal.


Be the first to comment